1997 ford f350 rear axle specs. 1994 2019-01-11

1997 ford f350 rear axle specs

Rear Axle for 1997 Ford F

1997 ford f350 rear axle specs

Used in Models: E250: 1969 - 2002 Rear E350: 1988 - 2001 Rear F100: 1965 - 1971 Rear F250: 1954 - 2002 Rear F250: 1978 - 1979 Front F250: 2002 - 2006 Front F350: 1979 - 2003 Front Dana Spicer D61 10 bolt cover with 9. The wheel bolts to a hub. In 99, they changed to the 10. Differentials older than 1993 will require a new yoke to be compatible with a new ring and pinion. I have had 2 other used gears that I got some noise out of after setup and the others were visibly worn. Often confused with a Dana Spicer 60.

Next

Identify Your Ford Truck Axle From The Door Sticker

1997 ford f350 rear axle specs

For those of us that demand substantial power increases and larger tires, there is room for improvement to improve the reliability and performance that they can afford. Used in Models: F350: 1980 - 1997 Rear Dana Spicer D70-U 10 bolt rear cover with 10. Has smaller pinion bearings than a standard Dana 70. My guess would be that it is a 4. Used in Models: E250: 1983 - 1997 Rear F250: 1983 - 1997 Rear F350: 1980 - 2002 Rear Dana Spicer D80 10 bolt rear cover with 11.

Next

what rear axle do i have?

1997 ford f350 rear axle specs

A non-floating, or semi-floating have the wheels bolt to the axle, and the axle shaft transmists rotational force and bears the weight of the vehicle. Has removable pinion support on the front. Has full floating axles with 30 or 35 spline. Later model fords use different pinion bearings than all other models. Found in both standard and reverse rotation. Used in Models: Ranchero: 1957 - 1979 Rear Bronco: 1966 - 1986 Rear E150: 1961 - 1987 Rear F100: 1957 - 1979 Rear Ford 9. So, for those of you following along at home.

Next

Used Rear Axle Assemblys for 1997 Ford F

1997 ford f350 rear axle specs

Please check your bill of material numbers for proper identification. Used in Models: E250: 1985 - 1998 Rear F150: 2000 - 2006 Rear F250: 1985 - 1998 Rear F350: 1985 - 1998 Rear Ford 10. Differentials older than 1993 will require a new yoke to be compatible with a new ring and pinion. Cheers, - Jeff I just assumed the site I got it from had it right. Found in mid-size Ford front applications.

Next

Dana 60 Parts, Tools, Manuals for 1992

1997 ford f350 rear axle specs

As previously stated, most of these trucks came factory with a 3. Front applications came in both standard and reverse rotation. Here are some examples of actually stickers: Once you know the door code, go to the chart below to identify it. Used in Models: Ranchero: 1964 - 1978 Rear Ford 8. Has smaller pinion bearings than a standard Dana 70. Used in Models: F250: 1999 - 2009 Rear F350: 1999 - 2009 Rear Dana Spicer D28 10 bolt front cover with 27 spline. Has full floating axles with 30 or 35 spline.

Next

Dana 60 Parts, Tools, Manuals for 1992

1997 ford f350 rear axle specs

Often confused with a Dana Spicer 60. Check it out, stick it back together with fresh fluid and run it. Ford used the axle through the end of the 1997 model year when the F-350 line was dropped and replaced by the 1999 F-350 Super Duty which initially only had a Dana 50 MonoBeam front Axle. Has full floating axles with 35 splines. What you can tow depends on what else is going on with the rest of the truck.

Next

Used Rear Axle Assemblys for 1997 Ford F

1997 ford f350 rear axle specs

Axle spline counts range from 16 to 35. Used in Models: Bronco: 1971 - 1977 Front F100: 1948 - 1979 Rear F150: 1967 - 1996 Front F250: 1959 - 1989 Front F350: 1979 - 1979 Front Dana Spicer D50 Ford front end, found in both straight axle and independent front suspensions. Has removable pinion support on the front. Used in Models: E250: 1983 - 1997 Rear F250: 1983 - 1997 Rear F350: 1980 - 2002 Rear Dana Spicer D80 10 bolt rear cover with 11. Used in Models: F250: 1999 - 2009 Rear F350: 1999 - 2009 Rear Dana Spicer D28 10 bolt front cover with 27 spline. Front applications came in both standard and reverse rotation. Over the years, these assemblies have proven themselves relatively reliable on moderately used trucks running stock, or close to stock tire size and power output.

Next

1997 f350 rear axle

1997 ford f350 rear axle specs

Used in Models: F250: 1980 - 2004 Front F350: 1980 - 1986 Front Dana Spicer D60 10 bolt cover with 9. You can knock the webs off the 10. Used in Models: E250: 1974 - 1984 Rear Dana Spicer D70 10 bolt cover with 10. Found in mid-size Ford front applications. Has full floating axles with 32 splines. Used in Models: F150: 1997 - 2006 Rear Ford 10.

Next

List of axles by year?

1997 ford f350 rear axle specs

I believe the 3 inch shoes were used on the full floater axles. They also changed to a three-spider carrier, which was supposed to fix the carrier cracking problem. We stock a wide selection of parts and Tools for 1992 to 1997 Ford F-350 Dana 60 open knuckle front drive axles with Ball Joints. I dunno what a Detroit for one costs now. It is a 1990 2wd f350 460 with 5 speed. Front applications came in both standard and reverse rotation.

Next

Identify Your Ford Truck Axle From The Door Sticker

1997 ford f350 rear axle specs

Used in Models: Ranchero: 1964 - 1978 Rear Ford 8. Used in Models: Ranchero: 1964 - 1978 Rear Ford 8. Used in Models: F150: 1997 - 2006 Rear Ford 10. Later model fords use different pinion bearings than all other models. Used in Models: F250: 1999 - 2009 Rear F350: 1999 - 2009 Rear Dana Spicer D28 10 bolt front cover with 27 spline. Has full floating axles with 32 splines. The noise isn't bad just noticable I guess.

Next